Skip to content
GLOSSDOC
  • Free shipping in Germany from €79
  • 30-day right of return
  • Express dispatch within 24 h

Step 2 of 3 · Car & Wheel Repair · 2 products

Primer & Spot Repair – Car & Wheel Repair by GLOSSDOC

Adhesion primer and seamless blends for a clean repair.

2 products

GLOSSDOC 1K Blending Paint 400 ml

1K Blending Paint 400 ml

(4)

€9.90

€24.75 / 1 l

GLOSSDOC 1K Epoxy Primer Grey 400 ml

1K Epoxy Primer Grey 400 ml

(4)

€9.90

€24.75 / 1 l

All prices incl. VAT, plus shipping. Unit prices per 1 l or 1 kg are shown on each product.

Not sure what you need?

More from Car & Wheel Repair

View all 9

Related guides

Buying guide

Primer and blending paint for clean repairs

Primer and spot repair go hand in hand: a paint repair only lasts as long as its base. The 1K Epoxy Primer Grey creates a bonding layer on sanded areas and evens out small imperfections before colour and clear coat follow.

Read more

The 1K Blending Paint makes sure the transition between new and old paint does not remain visible as an edge – important for spot repairs, where only part of the surface is repainted.

How the two work together in a repair: DIY smart repair.

In which order?

A proven sequence: sand, degrease with silicone remover, prime, apply colour, seal with 2K clear coat and blend the edges with blending paint. Respect the drying times on the can between coats. A detailed guide is in the article Paint your wheels yourself.

Blending paint: how to use it and how it differs from primer

Primer is used wherever sanding has exposed bare metal or plastic. Blending paint does not need a bare surface: it softens the edges of the old paint so that the new and old layers merge. Many repairs use both, one after the other.

How to make the transition to the old paint invisible: Using blending paint correctly.

Frequently asked questions

Using blending paint: in what order?

For a spot repair, this order has proven itself:

  • Clean and degrease with silicone remover
  • Sand the damage, feather the edges, degrease again
  • Prime bare metal, e.g. with the 1K epoxy primer
  • Apply base coat in the car colour thinly to the repair area
  • Extend the 2K clear coat into the sanded blending zone
  • Straight after, mist the edge lightly with blending paint and polish once dry
Guide: using blending paint correctly →
What is blending paint?

Blending paint is sprayed onto the edge of fresh clear coat during a spot repair. It dissolves the fine overspray there so the new paint blends into the old without a visible edge.

Glossary: blending paint →
Do I have to blast wheels before painting them?

Not always. If the old paint is still firmly attached, sanding and degreasing are usually enough. Blasting or chemical stripping is necessary if the old paint is loose or flaking; for complete wheels, blasting is usually a job for a specialist.